BSE 111 - KC7: Hardening & Power for the Communications Architecture

What is the E1 threat to communications equipment specifically?

The fast electromagnetic pulse (EMP) component drives a surge down the antenna and its feedline directly into the radio, destroying its electronics

Correct Incorrect Correct answer

E1 physically melts antenna masts

Correct Incorrect Correct answer

E1 only affects equipment that is transmitting at the moment of the event

Correct Incorrect Correct answer

E1 erases radio memories but leaves hardware intact

Correct Incorrect Correct answer

What does protection Layer 1 require at communications sites?

Painting equipment enclosures with conductive paint

Correct Incorrect Correct answer

A surge protective device (SPD) at every antenna and coaxial feedline entry point and at every power panel feeding the communications facility

Correct Incorrect Correct answer

A lightning rod on the roof and nothing else

Correct Incorrect Correct answer

Unplugging antennas every night

Correct Incorrect Correct answer

What does protection Layer 2 add?

Backup paper logs of all radio settings

Correct Incorrect Correct answer

Nothing; Layer 1 makes further layers redundant

Correct Incorrect Correct answer

Surge protective device plugin units at the individual transceiver, amplifier, and ancillary equipment power connections inside the operating positions

Correct Incorrect Correct answer

A second antenna for redundancy

Correct Incorrect Correct answer

What does protection Layer 3 require for the tactical radio inventory?

Storing spares in a locked wooden cabinet

Correct Incorrect Correct answer

Keeping all spares powered on so they are ready instantly

Correct Incorrect Correct answer

Distributing every spare immediately so none sit in storage

Correct Incorrect Correct answer

Faraday storage for spare and backup Family Radio Service/General Mobile Radio Service handhelds and Citizens Band units when not in use, protecting them from radiated E1

Correct Incorrect Correct answer

Why does a single countermeasure not cover the whole electromagnetic threat?

Because the fast and slow components require different defenses – the fast-acting surge protection and shielding that stop E1 do nothing against E3 and geomagnetic disturbance (GMD), which build up in long wires, so the plan documents layer coverage per node

Correct Incorrect Correct answer

Because vendors refuse to sell integrated products

Correct Incorrect Correct answer

Because only military equipment can be protected at all

Correct Incorrect Correct answer

A single surge strip does in fact cover everything

Correct Incorrect Correct answer

What is the power independence requirement, and what does it buy?

Operating radios only during daylight to skip storage entirely

Correct Incorrect Correct answer

Solar plus battery with EMP-protected inverter inputs at every ham base station – indefinite operation independent of both the grid and generator fuel

Correct Incorrect Correct answer

A 90-day diesel reserve per station

Correct Incorrect Correct answer

Grid power with a transfer switch to a neighbor’s generator

Correct Incorrect Correct answer

Who owns the engineering of the power systems this block requires?

The utility company, by tariff obligation

Correct Incorrect Correct answer

No one; power engineering is out of scope for the framework

Correct Incorrect Correct answer

BSE 105 – the shadow grid and energy independence domain – with this course stating the communications requirement and cross-referencing the engineering

Correct Incorrect Correct answer

This course, which includes a full microgrid design appendix

Correct Incorrect Correct answer

How is communications-site physical security handled in this course?

With a full guard-force manual included in this block

Correct Incorrect Correct answer

It is not a concern, since radio sites have no theft value

Correct Incorrect Correct answer

By keeping all site locations secret from the community

Correct Incorrect Correct answer

Stated as a requirement – tower and repeater site protection, backup equipment security at consolidation points – with the security practice owned by BSE 108 and the Tier 0S structure, cross-referenced

Correct Incorrect Correct answer

How do protected spares interact with the stockpile course?

Faraday-stored spares pair with BSE 112’s Category 4 spare lines – roughly 10 percent fleet spares plus per-layer spare radios – turning a destroyed unit into a swap instead of a lost capability

Correct Incorrect Correct answer

Spares are unnecessary if Layer 1 protection is installed

Correct Incorrect Correct answer

The spare requirement is 100 percent – a full duplicate fleet

Correct Incorrect Correct answer

Spares are borrowed from neighboring communities after the event

Correct Incorrect Correct answer

Spell out the electromagnetic threat pair this block plans against.

Cosmic rays, which no planning can address

Correct Incorrect Correct answer

Electromagnetic pulse (EMP) and geomagnetic disturbance (GMD) – the fast weapon-driven pulse and the slow solar-driven coupling, each demanding its own countermeasures

Correct Incorrect Correct answer

Static electricity and household lightning only

Correct Incorrect Correct answer

Radio interference from neighboring communities

Correct Incorrect Correct answer

BSE 111 – KC7: Hardening & Power for the Communications Architecture

BSE 111 – KC7: Hardening & Power for the Communications Architecture

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question